<strong id="ab8dk"><kbd id="ab8dk"></kbd></strong>

    <em id="ab8dk"></em><tbody id="ab8dk"></tbody>
    <em id="ab8dk"></em>

    Set as homepage Add to Favorites 中文  



    Your location:Home >New dry desulfurization technology (NDS)
    New dry desulfurization technology (NDS)

    System composition

    The NDS system consists of a vertical reactor, a dust collector, an absorbent preparation system, a material conveying system, a desulfurization ash conveying and storage system, an electrical control system, and an on-line monitoring system.

    Process flow diagram


    Technological process

    The flue gas enters the vertical reactor, is mixed with the desulfurizing agent from the absorbent mixing humidification device, and is circulated and fluidized in the vertical reactor, and the desulfurizing agent is in full contact with the acid component in the flue gas to remove the SO2. Then enter the dust collector (electric precipitator or bag filter) to remove soot and ash from the flue gas. The purified flue gas enters the chimney through the fan and is discharged into the atmosphere.

    The desulfurized ash deposited on the bottom of the vertical reactor enters the ash silo directly. The desulfurization ash trapped by the dust collector enters the absorbent mixing humidification device through the return circulation device, and is mixed with the newly added absorbent to be humidified and then enters the vertical reactor, and can also directly enter the ash silo.

    Key Features

    1) CaO digestion and ash cycle humidification integrated design, compact structure.

    2) The structure of the vertical reactor is unique, simple and compact, with small footprint, easy installation and maintenance, low wear and tear, long service life and low maintenance.

    3) Desulfurization efficiency is up to 90%. High utilization rate of desulfurizer; No sewage is produced, and desulfurization by-products are easy to be treated.

    4) The reactor and its downstream equipment will not be stuck, clogged, and protected from corrosion.

    Copyright © 2013-2022 www.cnbmep.net Record No.: 蘇ICP備13026961號-1 CNBM Environmental Protection Research Institute (Jiangsu) Co., Ltd. All rights reserved
    Address:No. 8 Guangfu Road, Environmental Protection Science and Technology City, Tinghu District, Yancheng City, Jiangsu Province
    Tel:0515-69931829,0515-69931808 Fax:515-69931899,0515-69931816 Technical support:Yancheng Fire Search Network

    <strong id="ab8dk"><kbd id="ab8dk"></kbd></strong>

      <em id="ab8dk"></em><tbody id="ab8dk"></tbody>
      <em id="ab8dk"></em>